|
|
|
|
Search Products >
Spinal Bracing (LSO)
|
Pro-Fitt™ LSO & TLSO Spinal Orthoses
|
US Patents 5,207,636 &/or 5,267,948 |
The Pro-Fitt™ LSO and TLSO provide intra-abdominal muscle compression and provide a lift to hold the weight of
the abdominal area. By lifting and holding the weight, pressure is relieved from lumbar discs, reducing the
associated pain. The posterior and anterior shells work together to give opposing support to stabilize the
lumbar region. The result is a supported and pressure-free lumbar spine held in a healthy, correct posture.
Anatomically designed around the hips and rib line for a comfortable, custom-like fit in an off-the-shelf
design. The Pro-Fitt TLSO includes a sternal pad kit with an anterior extension bar to prevent flexion and
support the spine from T5 to S5. Patented strapping method provides a secure fit with no migration. Color: White.
HCPCS Code: L0639
View SADMERC Letter
|
Measure chest circumference, waist circumference (taken tightly at the navel),
and pelvis circumference (taken at the widest part of the hips).
Specify male or female and normal
or pendulous design.
For TLSO only, measure length from sternal notch to symphysis pubis. |
|
| Sizes |
Male |
Female |
| Normal Design |
| Small |
Chest 33 - 35"
Waist 26 - 30"
Pelvis 34 - 36" |
Chest 28 - 32"
Waist 19 - 25"
Pelvis 31 - 35" |
| Medium |
Chest 36 - 38"
Waist 31 - 35"
Pelvis 37 - 39" |
Chest 32 - 36"
Waist 25 - 31"
Pelvis 36 - 40" |
| Large |
Chest 39 - 41"
Waist 36 - 40"
Pelvis 40 - 42" |
Chest 36 - 40"
Waist 31 - 37"
Pelvis 41 - 45" |
| X-Large |
Chest 42 - 44"
Waist 41 - 45"
Pelvis 43 - 45" |
Chest 40 - 44"
Waist 37 - 43"
Pelvis 46 - 50" |
| Pendulous Design |
| Small |
Chest 34 - 36"
Waist 30 - 34"
Pelvis 36 - 38" |
Chest 29 - 33"
Waist 23 - 29"
Pelvis 33 - 37" |
| Medium |
Chest 37 - 39"
Waist 35 - 39"
Pelvis 39 - 41" |
Chest 33 - 37"
Waist 29 - 35"
Pelvis 38 - 42" |
| Large |
Chest 40 - 42"
Waist 40 - 44"
Pelvis 42 - 44" |
Chest 37 - 41"
Waist 35 - 41"
Pelvis 43 - 47" |
| X-Large |
Chest 43 - 45"
Waist 45 - 49"
Pelvis 45 - 47" |
Chest 41 - 45"
Waist 41 - 47"
Pelvis 48 - 52" |
| XX-Large |
Chest 46 - 48"
Waist 50 - 53"
Pelvis 48 - 50" |
Chest 46 - 50"
Waist 48 - 54"
Pelvis 53 - 57" |
|
To Apply the ProFitt™ LSO/TLSO Spinal Orthosis,
Caregiver Instructions -- Application to Patient
It is recommended that the Pro-Fitt™ be applied while the patient is lying down with the knees bent towards
the chest. The patient's upper body and head should remain flat without the use of pillows.
|
| 1. Raise the patient's upper body and slide the posterior portion of the Pro-Fitt™ into place. It should be centered on
the back with the bottom of the orthosis resting at the top of the buttocks. Pull elastic closures (1 on each side) and the closure
straps (2 on each side) out to the side. Lay the patient back into position.
|
 |
| 2a. Place the anterior shell over the patient's abdomen. The indentations on the anterior shell should be positioned on
the top of the hip bones. |
 |
| 2b. TLSO only: The ears of the anterior extension bar (sternal pad kit) should rest comfortably on the pectoral muscles
(chest) approximately 3" below the sternal notch. If this is not the case, refer to the sternal pad kit instructions below. |
 |
| 3. Secure each elastic side panel to the vertical strips located on each side of the anterior shell. The brace should
feel snug. |
 |
| 4a. Using the metal D-rings, attach the two bottom straps to the corresponding metal chafes on the anterior shell.
|
 |
| 4b. Pull the double sided hook and loop strap out to tighten and place strap over the bottom horizontal loop strip.
Repeat for the second bottom strap and secure it over top the first strap. Repeat this procedure for the top two straps. |
 |
| 5. TLSO only: Once properly positioned, the sternal pad kit can easily be adjusted for snugness by simply tightening or
loosening the straps located on either side of the sternal pad. |
 |
| 6. To adjust the height of the sternal pad kit: The height of the sternal pad can be adjusted up or down using a flat
head screwdriver. Remove the center (large-head) screw. Loosen the four corner (small-head) screws. Slide bar up or down to desired
height. Replace and tighten center screw. Tighten the four corner screws.
|
 |
Patient Instructions -- Application to Patient
While Lying Down
A. Detach the D-rings from the anterior (front) panel on one side only. The hook and loop sewn on the ends temporarily holds them
together to keep them untangled. Detach the elastic closure on the
same side.
B. Lying on your back, slide posterior (back) panel into place. It should be centered on the back with the bottom of the shell resting
at the top of the buttocks. Pull the elastic closure and upper and lower straps out to the side. Unfasten the hook and loop on each
closure strap.
C. Pull the anterior (front) shell over the abdomen. The indentations on this front shell should be positioned on the top of the hip
bones.
D. Follow caregiver instructions beginning with step 2b for TLSO application and 3 for LSO application. You will only need to secure the
one remaining elastic side panel in step 3.
While Standing:
A. Detach the D-rings from the anterior (front) panel on one side only. The hook and loop sewn on the ends temporarily holds them
together to keep them untangled. Detach the elastic closure on the same side.
B. Place the posterior panel on the back so it is centered on the back with the bottom of the shell resting at the top of the buttocks.
C. Holding the posterior panel in position, pull the anterior (front) section around and secure remaining elastic closure. The
indentations on the front shell should be positioned on the top of the hip bones.
D. Follow caregiver instructions beginning with step 4a.
To Remove:
Unfasten hook and loop closure straps on top and bottom. Unhook metal D-rings from chafes on one side. Detach elastic closure on same
side.
|
|
How to Order:
Please contact our New Jersey Office at 800-822-2210.
|
|
 | |
